Showing posts with label Fabric. Show all posts
Showing posts with label Fabric. Show all posts

Sunday, October 23, 2011

Can You Extend the Life and Mileage of Your Car's Exhaust and Muffler System?

Can You Extend the Life and Mileage of Your Car's Exhaust and Muffler System?

Exhaust System

Most auto owners do not give the exhaust system of their vehicle one minute though. That is until they hear a loud boom, exhaust hissing or rattling noises coming quite scarily from the rear of their car or truck. On top of that there are health and safety concerns from exhaust gasses. You can almost bet by the time they get to that point that they are going to be recipients of a large muffler or exhaust system repair bill. Is their any way that most motorists can extend the life and driving span of their exhaust and muffler system or systems?

Basically put your car or truck's exhaust system includes the exhaust manifold, muffler, connecting pipes and in some cases a resonator. Any automobile made in the last 30 years will definitely have a catalytic converter you can bet. Single exhaust setups use an exhaust manifold of a single exhaust pipe, muffler assembly and tail pipe that extends under of just short of the rear bumper whereas on a dual exhaust system arrangement two exhaust pipes and a muffler assembly are used together with two resonators, two tail pipes. Each assembly is connected to it s own exhaust manifold and carries the exhaust gasses to the rear of the vehicle.

The life of the mufflers and pipes is dependent largely on the type of service in which the vehicle is used. If it is driven mostly in city type stop and go traffic with few trips exceeding five miles, you can bet that the muffler will soon be rusted out, have a shorter life span and that the automobile owner will be making a visit either to his local mechanic at their garage or to his dealership service center. Since installing mufflers and exhaust systems is a specialized job many garages themselves as well as those auto owners often have the work done at shops and garages that specialize in exhaust system and muffler repair and replacement.

The reason for such short muffler life spans is that on short trips the mufflers and pipes will never get warm never mind hot enough to evaporate moisture in the system - that in the end works to rust out any steel metal components of mufflers and exhaust systems. This moisture not only clings to the metal components and is rust causing by it but wore me highly acidic in nature and most corrosive - mixing with the exhaust gas remnants and left over residuals from the internal combustion engine's combustion process. As a result the pipes and mufflers are soon corroded and have to be replaced.

If the car is driven mostly on long and longer mileage trips, or mainly at good speeds on freeway travel, then conversely the mufflers and the pipes that it is attached to will soon get hot enough to simply evaporate this moisture, similar to how a hot kettle boils off water. Consequently corrosive action (that is rusting and the formation of rust on the metal parts and surfaces of the muffler) will be slowed down and retarded. Consequently your vehicle will have its muffler and exhaust system will last longer and have a longer life span.

Interestingly it seems that Mufflers and pipes used on a single exhaust system, will generally last longer than dual muffler installations because all the hot exhaust gasses are propelled and pass through one single pipe - that is the one solitary muffler. As a result in a single muffler system temperatures generally reach a higher value sooner rather than later. Hence the corrosive moisture has a better chance of being heated up and evaporated into the atmosphere with less of a chance that will linger on metal surfaces and components to do its rusting job.

The general rule of thumb from experienced auto mechanics and automotive dealership service writers is that mufflers and pipes should be replaced before they are rusted completely, for if there are any leaks in the system what so ever, the exhaust which are poisonous and injurious to health will escape into the interior of the vehicle where they can potentially cause the death of the occupants and riders or a serious accident if the driver becomes affected by exhaust gas and gasses.

deni ice cream maker recipes

Thursday, September 1, 2011

Cheap Flowmaster 817460

Flowmaster 817460 Axle-back System 409S - Dual Rear Exit - Classic American Thunder - Aggressive Review


List Price : $600.00


Sale Price : $359.95


Availibility : Usually ships in 1-2 business days



Flowmaster 817460 Axle-back System 409S - Dual Rear Exit - Classic American Thunder - Aggressive Feature

  • Mandrel bent 16 gauge 409 stainless tubing
  • Aggressive and powerful exterior exhaust tone
  • Includes hangers and hardware for easy installation
  • Axle back system
  • Dyno tuned for maximum performance

Flowmaster 817460 Axle-back System 409S - Dual Rear Exit - Classic American Thunder - Aggressive Overview

This aggressive sounding system is designed to replace the original rear mounted mufflers located behind the rear axle. With easy fit in mind, the system is mandrel bent for maximum performance and includes specially selected mufflers to support the performance image of the car. As an American Thunder system, it delivers an aggressive exterior tone with moderate interior sound level that is suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, the system does require cutting of the factory system and includes all necessary parts and hardware for easy installation.

messenger bag timbuk2 Kamenstein Tea Kettle ceramic tile looks like wood

Tuesday, August 30, 2011

Replacing a bathroom exhaust fan

Replacing a bathroom exhaust fan

Exhaust System

My old fan in the bathroom had to be replaced, it was not very good, and I was concerned about the potential growth of mold. Instead of calling a HVAC service in the area of ​​South Jersey for a simple project, but I decided to do it yourself.

First I turned off the electricity to the bathroom by removing the fuse (you can also simply turn off the main switch). With a scale, I unscrewed the grill and took him away. If there are no screws on the lid,Should be able to simply pull out. I unhooked the fan and pulled him down, so that the wiring was exposed behind.

To remove the fan, I screwed the nuts on the black and white wires and screws from the bottom (with the bare copper wire). Thankfully, my replacement fan is the size of the old. If not, you most likely to cut little 'space in the ceiling or walls - wherever it's your fans. The fan should come with a model that is the first trackCut.

Next, I wired the black wire and then the white wires together. Then I connected the cable grounding copper, turn the new leader, so it has remained behind the ground screw. I screwed the new exhaust fan in the main proceedings and made sure that the wiring was safe in the junction box. Before replacing the grill cover, I manually turned the fan to test the movement. Finally I turned the power back and enjoy my new exhaust fan! I never worried about the structure ofOdors, dust and mold, and the best part that did not pay anyone to do it for me.

wicker hamper baskets young guns golf clubs golf laser rangefinder